The HOPKINS/BWM REDAIR FLASH DRYERS are the proven production heaters for surface curing most inks on printed apparel. Using a combination of infrared (IR) energy and heated forced air, these units are designed to increase production output quickly, safely and economically!

How does it work?

Ambient room air is drawn into the top of the IR panel through a fan. The energized IR panel super heats the air as the fan pushes it through a network of molded holes and out the bottom of the panel and onto the substrate. This combination of heated air and IR energy results in faster curing for increased output!

Available as Manual or Automatic

Automatic unit rotates over the shirtboard when the foot switch is pressed. Unit then rotates back at the end of the timer cycle.